Différences

Ci-dessous, les différences entre deux révisions de la page.

--- commun:jeedom_saint-jeoire [2022/09/24 14:12] – francois
+++ commun:jeedom_saint-jeoire [2022/11/12 10:02] (Version actuelle) – francois
@@ Ligne 1: / Ligne 1: @@
 ====== Domotique Jeedom à Saint-Jeoire ======
+===== Home Energy Meter Gen5 =====
+Configuration des rapports.
+  * Byte 1 (msb):
+    * Bit 7: Reserved
+    * Bit 6: Reserved
+    * Bit 5: Auto Send Meter Report (for kVar) at the group time interval (Clamp 3)
+    * Bit 4: Auto Send Meter Report (for kVar) at the group time interval (Clamp 2)
+    * Bit 3: Auto Send Meter Report (for kVar) at the group time interval (Clamp 1)
+    * Bit 2: Auto Send Meter Report (for KVah) at the group time interval (Clamp 3)
+    * Bit 1: Auto Send Meter Report (for KVah) at the group time interval (Clamp 2)
+    * Bit 0: Auto Send Meter Report (for KVah) at the group time interval (Clamp 1)
+  * Byte 2:
+    * Bit 7: Reserved
+    * Bit 6: Reserved
+    * Bit 5: Auto Send Meter Report (for A) at the group time interval (Clamp 3)
+    * Bit 4: Auto Send Meter Report (for A) at the group time interval (Clamp 2)
+    * Bit 3: Auto Send Meter Report (for A) at the group time interval (Clamp 1)
+    * Bit 2: Auto Send Meter Report (for V) at the group time interval (Clamp 3)
+    * Bit 1: Auto Send Meter Report (for V) at the group time interval (Clamp 2)
+    * Bit 0: Auto Send Meter Report (for V) at the group time interval (Clamp 1)
+  * Byte 3:
+    * Bit 7: Reserved
+    * Bit 6: Reserved
+    * Bit 5: Auto Send Meter Report (for kWh) at the group time interval (Clamp 3)
+    * Bit 4: Auto Send Meter Report (for kWh) at the group time interval (Clamp 2)
+    * Bit 3: Auto Send Meter Report (for kWh) at the group time interval (Clamp 1)
+    * Bit 2: Auto Send Meter Report (for Watt) at the group time interval (Clamp 3)
+    * Bit 1: Auto Send Meter Report (for Watt) at the group time interval (Clamp 2)
+    * Bit 0: Auto Send Meter Report (for Watt) at the group time interval (Clamp 1)
+  * Byte 4 (lsb):
+    * Bit 7: Reserved
+    * Bit 6: Reserved
+    * Bit 5: Auto Send Meter Report (for kVar) at the group time interval (Whole HEM)
+    * Bit 4: Auto Send Meter Report (for KVah) at the group time interval (Whole HEM)
+    * Bit 3: Auto Send Meter Report (for A) at the group time interval (Whole HEM)
+    * Bit 2: Auto Send Meter Report (for V) at the group time interval (Whole HEM)
+    * Bit 1: Auto Send Meter Report (for Watt) at the group time interval (Whole HEM)
+    * Bit 0: Auto Send Meter Report (for kWh) at the group time interval (Whole HEM)
+==== Groupe 1 ====
+^1+2^2+2^3 = 14
+==== Groupe 2 ====
+^0 = 1
+==== Groupe 3 ====
 ===== Popp mold detector =====
 Pour que ce module fonctionne, il faut faire des modifs dans jeedom.
+==== Etape 1 ====
 dans le fichier ''html/plugins/openzwave/resources/openzwaved/config/manufacturer_specific.xml'', il faut rajouter une ligne.
@@ Ligne 14: / Ligne 65: @@
 </code>
-Ensuite il faut copier {{ :commun:maison:701202.zip |}} ici : ''html/plugins/openzwave/resources/openzwaved/config/popp/701202.xml''
+==== Etape 2 ====
+Il faut copier {{ :commun:maison:701202.zip |}} ici : ''html/plugins/openzwave/resources/openzwaved/config/popp/701202.xml''
+==== Etape 3 ====
-Et {{:commun:maison:340.4.20_701202.popp.mold.detector.png?100|}} ici : ''html/plugins/openzwave/core/config/devices/popp_340/340.4.20_701202.popp.mold.detector.png''
+Il faut copier {{:commun:maison:340.4.20_701202.popp.mold.detector.png?100|}} ici : ''html/plugins/openzwave/core/config/devices/popp_340/340.4.20_701202.popp.mold.detector.png''