Différences

Ci-dessous, les différences entre deux révisions de la page.

--- francois:beaglebone_black [2017/09/17 13:58] – francois
+++ francois:beaglebone_black [2017/09/17 14:44] (Version actuelle) – francois
@@ Ligne 80: / Ligne 80: @@
 sudo sh -c "echo '/dev/mmcblk0p1  /  auto  errors=remount-ro  0  1' >> rootfs/etc/fstab"
 </code>
+===== Configurer le réseau =====
+Ajouter à ''/etc/network/interfaces''
+<code>
+auto lo
+iface lo inet loopback
+auto eth0
+iface eth0 inet dhcp
+</code>
+==== USB Gadget ====
+Provides http access to beaglebone black over usb.
+Install udhcpd
+  sudo apt-get install udhcpd
+Edit: /etc/network/interfaces and add
+<code>
+# Ethernet/RNDIS gadget (g_ether)
+# ... or on host side, usbnet and random hwaddr
+iface usb0 inet static
+        address 192.168.7.2
+        netmask 255.255.255.252
+        network 192.168.7.0
+        gateway 192.168.7.1
+</code>
+  wget -c https://raw.github.com/RobertCNelson/tools/master/scripts/beaglebone-black-g-ether-load.sh
+  chmod +x beaglebone-black-g-ether-load.sh
+  sudo ./beaglebone-black-g-ether-load.sh
+===== eMMC =====
+Script to copy your microSD card to eMMC: (this will need these packages installed: initramfs-tools dosfstools rsync)
+  wget https://raw.githubusercontent.com/RobertCNelson/boot-scripts/master/tools/eMMC/bbb-eMMC-flasher-eewiki-ext4.sh
+  chmod +x bbb-eMMC-flasher-eewiki-ext4.sh
+  sudo /bin/bash ./bbb-eMMC-flasher-eewiki-ext4.sh
 ===== Liens utiles =====