Différences

Ci-dessous, les différences entre deux révisions de la page.

--- francois:gammu [2015/12/20 12:51] – francois
+++ francois:gammu [2022/08/13 14:57] (Version actuelle) – [Gammu et le Huawei E220] francois
@@ Ligne 2: / Ligne 2: @@
 udev rule (file /etc/udev/rules.d/modem.rules):
-  SUBSYSTEM=="tty", ATTRS{idVendor}=="12d1", ATTRS{idProduct}=="1001", SYMLINK+="modem_huawei_%n"
+  SUBSYSTEM=="tty", ATTRS{idVendor}=="12d1", ATTRS{idProduct}=="1001", SYMLINK+="modem_huawei_$env{ID_USB_INTERFACE_NUM}"
 Ensuite, il faut prendre en compte le changement
-<code bash>
-sudo udevadm control --reload
-sudo udevadm trigger
-sudo systemctl status systemd-udevd
-</code>
-.gammurc
+  sudo udevadm control --reload-rules
+  sudo udevadm trigger
+====== Installer le nécessaire ======
-  [gammu]
+  sudo apt install gammu gammu-smsd python3-gammu
-  device = /dev/ttyUSB0
-  name = Téléphone sur le port USB série HUAWEI_TechnologiesHUAWEI_Mobile
+====== Configurer gammu ======
-  connection = at
+  sudo usermod -aG dialout gammu
+  sudo usermod -aG dip gammu
+  sudo chown -R gammu.gammu /var/spool/gammu
+dip est le groupe pour démarrer pppd par l'entremise de wvdial
+====== Fichier de configuration de gammu-smsd ======
+<file "/etc/gammu-smsdrc">
+[gammu]
+# Please configure this!
+port = /dev/modem_huawei_02
+connection = at19200
+# Debugging
+#logformat = textall
+[smsd]
+service = files
+logfile = syslog
+pin = 115200
+# Increase for debugging information
+debuglevel = 0
+# Paths where messages are stored
+inboxpath = /var/spool/gammu/inbox/
+outboxpath = /var/spool/gammu/outbox/
+sentsmspath = /var/spool/gammu/sent/
+errorsmspath = /var/spool/gammu/error/
+</file>
+===== Configuration Gammu SMSD systemd =====
+Préparation de la conf
+  sudo systemctl stop gammu-smsd
+  sudo systemctl disable gammu-smsd
+  rm /etc/init.d/gammu-smsd
+Default config /etc/default/gammu-smsd
+<file /etc/default/gammu-smsd>
+DAEMON_OPTS=""
+# user to use (gammu is default)
+GAMMU_USER=gammu
+GAMMU_GROUP=gammu
+</file>
+Configuration du fichier systemd de gammu-smsd ''/etc/systemd/system/multi-user.target.wants/gammu-smsd.service''
+<file /etc/systemd/system/multi-user.target.wants/gammu-smsd.service>
+[Unit]
+Description=SMS daemon for Gammu
+Documentation=man:gammu-smsd(1)
+After=mysql.service postgresql.service network-online.target
+[Service]
+EnvironmentFile=-/etc/default/gammu-smsd
+# Run daemon as root user
+#ExecStart=/usr/bin/gammu-smsd --pid=/var/run/gammu-smsd.pid --daemon
+# Run daemon as non-root user (set user/group in /etc/sysconfig/gammu-smsd)
+ExecStart=/usr/bin/gammu-smsd --user=${GAMMU_USER} --group=${GAMMU_GROUP} --pid=/var/run/gammu-smsd.pid --daemon
+ExecReload=/bin/kill -HUP $MAINPID
+ExecStopPost=/bin/rm -f /var/run/gammu-smsd.pid
+Type=forking
+PIDFile=/var/run/gammu-smsd.pid
+[Install]
+WantedBy=multi-user.target
+</file>
+Then the restart of the gammu-smsd daemon
+  sudo systemctl daemon-reload
+  sudo systemctl start gammu-smsd