Différences

Ci-dessous, les différences entre deux révisions de la page.

--- francois:huawei_e220 [2016/08/23 08:11] – [Modes of operation] francois
+++ francois:huawei_e220 [2020/12/17 09:31] (Version actuelle) – francois
@@ Ligne 133: / Ligne 133: @@
 Beware: I just spent one hour debugging, because I did get the “ERROR: 330” message despite the fact that “CSCA” did return the correct number. In the end I decided to just write the number again to the modem and give it a try. And it worked. I just have no idea why…
-===== WvDial =====
+===== ^BOOT =====
-<file /etc/wvdial.conf>
+In AT Command Interface Specification, Huawei mention that ^BOOT unsolicited command only for the Huawei specified client, nothing specific.
-[Dialer Free]
-Modem = /dev/modem_huawei_0
+You can disable all unsolicited result by the following AT command:
-Init2 = ATZ
-Init3 = ATQ0 V1 E1 S0=0 &C1 &D2
+  AT^CURC=0
-Init4 = AT+CGDCONT=1,"IP","free"
-Stupid mode = 1
+To enable it back just change 0 to 1:
-Phone = *99#
-New PPPD = yes
+  AT^CURC=1
-Check Def Route = 1
-Username = free
-Password = free
-Baud = 3600000
-</file>
-Ensuite, pour activer la liaison:
-<code bash>
-modprobe ppp-generic
-wvdial free
-</code>