Nuage

Cette page est en lecture seule. Vous pouvez afficher le texte source, mais ne pourrez pas le modifier. Contactez votre administrateur si vous pensez qu'il s'agit d'une erreur.
====== VxWorks GDB commands ======

===== Generic commands =====


|**Command**| **Description**|
|**cd** //directory//|Change the working directory.|
|**complete**|List the completions for the rest of the line as a command.|
|**directory** //dir//| Append a directory to the DIRECTORY variable (for source file searches.)|
|**echo** //string//| Print a string.|
|**help** //command//| Print a description of command .|
|**interpreter-exec mi** //command//| Send a GDB/MI command to the debug framework. command is the name of the command to execute.|
|**list** //[line or symbol or filename ]//| Display ten lines of a source file, centered around a line number or symbol.| 
|**object flush**| Force the debugger to flush cached information about all TOS objects in a core.|
|**output** //expression//| Like print, but don't put in value history and don't print a new line.|
|**path** //pathname//| Append pathname to the PATH variable.|
|**pwd**| Print the working directory.|
|**printf** //"format_string ", [arg0 ], ..., [argN ]//| Write formatted operands to stdout. This is useful for formatted output in user-defined commands. The following basic format specifiers are supported: %s,%c,%d,%u,%x,%b,%o,%f. For format types %c, %b, %o, and %f, characters for flag (+, -, and so on), width (%4d), precision (%4.4f), and length (%lld, and so on) are not supported; the host shell ignores them. Format types %s, %d, %x, and %u support complex characters (such as %.2d or %#08x.) |
|**q** or **quit**| Quit the host shell.|
|**server**| If you prefix any command with server, it will not affect the command history. It will also not affect the host shell's rule for which command to repeat if you press ENTER on a line by itself. This means that commands can be run behind a user's back by a front-end in a transparent manner. The server prefix does not affect the recording of values into the value history. To print a value without recording it into the value history, use the output command instead of the print command. Using this prefix also disables confirmation requests.|
|**shell** //command//| Execute the rest of the line as a shell command.|
|**show** path| Show the PATH variable.|
|**source** [/v ort /i] //filename//| Read commands from filename . The /v option specifies verbose mode: both the command and the output are printed. The /i option specifies that the host shell will ignore the first error (that is, it will not halt script execution on the first error.)|
|**spawn** //taskname//|Spawn a task on the target with default parameters. This command is only available when debugging a VxWorks kernel.|

===== Points d'arrêt =====


==== break ====

To set a breakpoint, use the break command. Multiple breakpoints at one place are permitted, and useful if conditional. 

==== Syntax ====

break [location ] [thread thread_ID ] [if condition ] [ignore count ] [ignore-reset count ] [count-or-condition] [condition-then-count] [count-then-condition] [timeslice timeslice_ID ] [before-prolog] 

==== Arguments ====

=== location ===

may be a line number, a function name, or "*" and an address. 

If you specify a line number, the host shell breaks at the start of code for that line. 
If you specify a function, the host shell breaks at the start of code for that function. 
If you specify an address, the host shell breaks at that exact address. 

If you do not specify a location , the host shell uses the current execution address of the selected stack frame. (This is useful for breaking on a return to a stack frame.) 

=== thread thread_ID ===
 

For a thread-specific breakpoint: stop the program when a particular thread reaches this breakpoint. thread_ID is one of the numeric thread identifiers assigned by gdb, shown in the first column of the info threads display. 


=== if condition ===
 
Ignore stop until condition is met. You can use brackets to surround expressions that contain spaces. (For special behavior if the ignore option is also set, see below.) See also the condition command (Table 5-2.) 

=== ignore count ===
 
Ignore first count stops at this breakpoint, and do not reset after breaking. The trigger value is count +1. (For special behavior if the if option is also set, see below.) See also the ignore command (Table 5-2.) 

=== ignore-reset count ===
 
Ignore first count stops at this breakpoint, and reset after breaking. The trigger value is count +1. For special behavior if the if option is also set, see below.) 

=== count-or-condition ===
 
If both the ignore option and the if option are set, then when the break address is hit, increment count . If count reaches the trigger value, or if condition is true, then stop; otherwise continue. 
If either the ignore option or the if option is not set, this argument does nothing. 

=== condition-then-count ===
 
If both the ignore option and the if option are set, then when the break address is hit, evaluate condition. If condition is true, then increment count . 
If count reaches the trigger value then stop; otherwise continue. (This is the GDB/MI default.) 
If either the ignore option or the if option is not set, this argument does nothing. 

=== count-then-condition ===
 
If both the ignore option and the if option are set, then when the break address is hit, increment count . If count reaches the trigger value, then evaluate condition . If condition is true then stop, otherwise continue. 
If either the ignore option or the if option is not set, this argument does nothing. 

=== timeslice timeslice_ID ===
 
Sets a time-qualified breakpoint. Stop the program when the breakpoint is hit in the specified time slice. (Only supported for MILS targets. Time-qualified breakpoints are not supported for On-Chip Debugging connections.) 

=== before-prolog ===
 
If an address matches the start of a function, set the breakpoint so that the host shell stops at that address (that is, at the start of the prolog.) 
By default, if the address matches the start of a function, the breakpoint would be set so that prolog is stepped over.
 
Note that information about local variables and backtrace could be incorrect if the prolog is not executed. 


===== Autres commands liées aux points d'arrêt =====


| **tbreak** or **t**| Set a temporary breakpoint.Arguments are the same as **break**.|
| **hbreak**| Set a hardware breakpoint.Arguments are the same as **break**.Not all targets support hardware breakpoints.|
| **clear** **<nowiki>[</nowiki>** //line // **|** //function // **|** //file:line // **]**| Clear a breakpoint.|
| **condition**  //bp_id condition //| Change a breakpoint condition (re-initializes the breakpoint).|
| **delete**  //bp_id //| Delete a breakpoint.|
| **disable**  //bp_id //| Disable a breakpoint.|
| **enable**  //bp_id //| Enable a breakpoint.|
| **enable delete** **<nowiki>[all</nowiki>** **|** **global-scope]**  //bp_id1 bp_id2 // ...| Enable breakpoints and delete them after they are hit.Arguments are breakpoint numbers with spaces in between.Use the **all** option to enable all breakpoints in all contexts.Use the **global-scope** option to apply the command to a context other than the currently selected context.|
| **enable keep** **<nowiki>[all</nowiki>** **|** **global-scope]**  //bp_id1 bp_id2 // ...| Enable breakpoints and keep them enabled until commanded otherwise.Arguments are breakpoint numbers with spaces in between.Use the **all** option to enable all breakpoints in all contexts.Use the **global-scope** option to apply the command to a context other than the currently selected context.|
| **enable once** **<nowiki>[all</nowiki>** **|** **global-scope]**  //bp_id1 bp_id2 // ...| Enable breakpoints until hit. After a breakpoint is hit, it becomes disabled.Arguments are breakpoint numbers with spaces in between.Use the **all** option to enable all breakpoints in all contexts.Use the **global-scope** option to apply the command to a context other than the currently selected context.|
| **ignore**  //bp_id count //| Ignore a breakpoint  //count // times (re-initializes the breakpoint).|
| **set breakpoint pending** **<nowiki>[on</nowiki>** **|** **off** **|** **auto]**| Set debugger behavior regarding pending breakpoints.**on** – an unrecognized breakpoint location causes gdb to create a pending breakpoint.**off** – an unrecognized breakpoint location results in an error.**auto** – an unrecognized breakpoint location results in a user query to ask if a pending breakpoint should be created.|
| **set breakpoint scope** **<nowiki>[global</nowiki>** **|** **system]**| Set debugger behavior regarding scope of breakpoints.**global** – set an unrestricted breakpoint to affect all contexts.**system** – set a restricted breakpoint to the system of the selected debug target.The default is **system**.This command is supported only for VxWorks&nbsp;MILS targets.|
| **show breakpoint pending**| Show the current setting for pending breakpoints.|
| **show breakpoint scope**| Show the current setting for breakpoint scope.This command is supported only for VxWorks&nbsp;MILS targets.|
| **unset**  //bp_id1 //  //bp_id2 // ...| Delete breakpoints or auto-display expressions. Arguments are breakpoint numbers with spaces in between.Entering **unset** with no arguments deletes all breakpoints.This is also a prefix command for deletion of gdb objects.|


===== Fichier à déboguer =====

|**Commande**|**Syntaxe**|**Description**|
|**file**| **file** //filename//| Define filename as the program to be debugged.|
|**exec-file**| **exec-file** //filename//| Use filename as a program for retrieving contents of pure memory.|
|**load**| **load** //filename//| Load a module. (Not supported for VxWorks Cert.)|
|**unload**| **unload** //filename//| Unload a module. (Not supported for VxWorks Cert.)|
|**attach**| **attach** //process_id//| Attach to a process.|
|**detach**| **detach**| Detach from the attached process.|
|**thread**| **thread** //thread_id//| Select a thread as the current task to debug.|
|**symbol-file**| **symbol-file** //filename//| Load symbol table from the executable file filename .|
|**add-symbol-file**| **add-symbol-file** //filename// [start_addr ]| Load symbol information from the object file filename . (Optionally, specify the start address.)|

===== Exécuter ou faire du pas à pas =====

|Command |Syntax |Description|
|**run**| **run**| Run a process for debugging (use set arguments and set environment if your program needs them).|
|**kill**| **kill** //process_id//| Kill a specified process. If no process is specified, kill the current debugging process. (Not supported for VxWorks Cert.)|
|**interrupt**| **interrupt**| Interrupt a running task or process.|
|**continue**| **continue**| Continue an interrupted task or process.|
|**system continue**| **system continue**| Resume the system. This differs from the continue command, since it does not synchronize on stopped or context-exit events.|
|**step**| **step** //[n ]//| Step current task until it reaches a different source line. If n is used, step n times.|
|**stepi**| **stepi** //[n ]//| Step one instruction. If n is used, step n times.|
|**next**| **next** [n ]|Step current task, proceeding through subroutine calls. If there are no subroutine calls, has the same result as a step command. If a subroutine call occurs, the call is treated as one instruction. If n is used, continue through n lines.
|**nexti**| **nexti** //[n ]//| Step one instruction. If the instruction is a function call, proceed until the function returns. If n is used, execute n instructions.|
|**until**| **until**| Continue running until a source line past the current line in the current stack frame is reached.| 
|**finish**| **finish**| Finish execution of current block. The finish command always acts on frame 0 (the frame where the instruction pointer is) even if you have selected another frame (for example, by using the frame or up commands).|