sudo apt install bacula

Ne pas chercher à configurer le client postgresql.

sudo apt install bacula-director-sqlite3

sudo systemctl start bacula-director.service
sudo systemctl start bacula-fd.service
sudo systemctl start bacula-sd.service

First mount the backup disk (see Backup des données)

Bacula needs a backup directory for storing backup archives and restore directory where restored files will be placed. So, if your system has multiple partitions then make sure to create the directories on one of large partition.

Run the commands below to create new directories for both backup and restore points.

mkdir -p /media/sauvegarde/b_backup/

Set the ownership and then permissions to the above directories using below commands.

chown -R bacula:bacula /media/sauvegarde/b_backup
chmod -R 700 /media/sauvegarde/b_backup

bacula-dir.conf

#
# Default Bacula Director Configuration file
#
#  The only thing that MUST be changed is to add one or more
#   file or directory names in the Include directive of the
#   FileSet resource.
#
#  For Bacula release 9.0.6 (20 November 2017) -- ubuntu 18.04
#
#  You might also want to change the default email address
#   from root to your address.  See the "mail" and "operator"
#   directives in the Messages resource.
#
# Copyright (C) 2000-2017 Kern Sibbald
# License: BSD 2-Clause; see file LICENSE-FOSS
#
 
Director {                            # define myself
  Name = cahute-dir
  DIRport = 9101                # where we listen for UA connections
  QueryFile = "/etc/bacula/scripts/query.sql"
  WorkingDirectory = "/var/lib/bacula"
  PidDirectory = "/run/bacula"
  Maximum Concurrent Jobs = 20
  Password = "BYF1Lkmsw-VZp6osL4xa5scn63QPEefB8"         # Console password
  Messages = Daemon
  DirAddress = 127.0.0.1
}
 
JobDefs {
  Name = "DefaultJob"
  Type = Backup
  Level = Incremental
  Client = cahute-fd
  FileSet = "Full Set"
  Schedule = "WeeklyCycle"
  Storage = File1
  Messages = Standard
  Pool = File
  SpoolAttributes = yes
  Priority = 10
  Write Bootstrap = "/var/lib/bacula/%c.bsr"
}
 
 
#
# Define the main nightly save backup job
#   By default, this job will back up to disk in /nonexistant/path/to/file/archive/dir
Job {
  Name = "BackupClient1"
  JobDefs = "DefaultJob"
}
 
# Backup the catalog database (after the nightly save)
Job {
  Name = "BackupCatalog"
  JobDefs = "DefaultJob"
  Level = Full
  FileSet="Catalog"
  Schedule = "WeeklyCycleAfterBackup"
  # This creates an ASCII copy of the catalog
  # Arguments to make_catalog_backup.pl are:
  #  make_catalog_backup.pl <catalog-name>
  RunBeforeJob = "/etc/bacula/scripts/make_catalog_backup.pl MyCatalog"
  # This deletes the copy of the catalog
  RunAfterJob  = "/etc/bacula/scripts/delete_catalog_backup"
  Write Bootstrap = "/var/lib/bacula/%n.bsr"
  Priority = 11                   # run after main backup
}
 
#
# Standard Restore template, to be changed by Console program
#  Only one such job is needed for all Jobs/Clients/Storage ...
#
Job {
  Name = "RestoreFiles"
  Type = Restore
  Client=cahute-fd
  Storage = File1
# The FileSet and Pool directives are not used by Restore Jobs
# but must not be removed
  FileSet="Full Set"
  Pool = File
  Messages = Standard
  Where = /media/stockage/system/b_backup/restore 
}
 
 
# List of files to be backed up
FileSet {
  Name = "Full Set"
  Include {
    Options {
      signature = MD5
    }
#
#  Put your list of files here, preceded by 'File =', one per line
#    or include an external list with:
#
#    File = <file-name
#
#  Note: / backs up everything on the root partition.
#    if you have other partitions such as /usr or /home
#    you will probably want to add them too.
#
#  By default this is defined to point to the Bacula binary
#    directory to give a reasonable FileSet to backup to
#    disk storage during initial testing.
#
    File = /media/stockage
  }
 
#
# If you backup the root directory, the following two excluded
#   files can be useful
#
  Exclude {
    File = /var/lib/bacula
    File = /media/stockage/system/b_backup 
    File = /proc
    File = /tmp
    File = /sys
    File = /.journal
    File = /.fsck
  }
}
 
#
# When to do the backups, full backup on first sunday of the month,
#  differential (i.e. incremental since full) every other sunday,
#  and incremental backups other days
Schedule {
  Name = "WeeklyCycle"
  Run = Full 1st sun at 23:05
  Run = Differential 2nd-5th sun at 23:05
  Run = Incremental mon-sat at 23:05
}
 
# This schedule does the catalog. It starts after the WeeklyCycle
Schedule {
  Name = "WeeklyCycleAfterBackup"
  Run = Full sun-sat at 23:10
}
 
# This is the backup of the catalog
FileSet {
  Name = "Catalog"
  Include {
    Options {
      signature = MD5
    }
    File = "/var/lib/bacula/bacula.sql"
  }
}
 
# Client (File Services) to backup
Client {
  Name = cahute-fd
  Address = localhost
  FDPort = 9102
  Catalog = MyCatalog
  Password = "yiqU4maMT7N0cqRr6k5ZZffEWHeFeJqHG"          # password for FileDaemon
  File Retention = 60 days            # 60 days
  Job Retention = 6 months            # six months
  AutoPrune = yes                     # Prune expired Jobs/Files
}
 
# Definition of file Virtual Autochanger device
Autochanger {
  Name = File1
# Do not use "localhost" here
  Address = localhost                # N.B. Use a fully qualified name here
  SDPort = 9103
  Password = "oWgUbJKr6EDurLmWJ1-h2Zx2kvLhaHMBP"
  Device = FileChgr1
  Media Type = File1
  Maximum Concurrent Jobs = 10        # run up to 10 jobs a the same time
  Autochanger = File1                 # point to ourself
}
 
# Generic catalog service
Catalog {
  Name = MyCatalog
  dbname = "bacula"; dbuser = ""; dbpassword = ""
}
 
# Reasonable message delivery -- send most everything to email address
#  and to the console
Messages {
  Name = Standard
#
# NOTE! If you send to two email or more email addresses, you will need
#  to replace the %r in the from field (-f part) with a single valid
#  email address in both the mailcommand and the operatorcommand.
#  What this does is, it sets the email address that emails would display
#  in the FROM field, which is by default the same email as they're being
#  sent to.  However, if you send email to more than one address, then
#  you'll have to set the FROM address manually, to a single address.
#  for example, a 'no-reply@mydomain.com', is better since that tends to
#  tell (most) people that its coming from an automated source.
 
#
  mailcommand = "/usr/sbin/bsmtp -h localhost -f \"\(Bacula\) \<%r\>\" -s \"Bacula: %t %e of %c %l\" %r"
  operatorcommand = "/usr/sbin/bsmtp -h localhost -f \"\(Bacula\) \<%r\>\" -s \"Bacula: Intervention needed for %j\" %r"
  mail = root = all, !skipped
  operator = root = mount
  console = all, !skipped, !saved
#
# WARNING! the following will create a file that you must cycle from
#          time to time as it will grow indefinitely. However, it will
#          also keep all your messages if they scroll off the console.
#
  append = "/var/log/bacula/bacula.log" = all, !skipped
  catalog = all
}
 
 
#
# Message delivery for daemon messages (no job).
Messages {
  Name = Daemon
  mailcommand = "/usr/sbin/bsmtp -h localhost -f \"\(Bacula\) \<%r\>\" -s \"Bacula daemon message\" %r"
  mail = root = all, !skipped
  console = all, !skipped, !saved
  append = "/var/log/bacula/bacula.log" = all, !skipped
}
 
# Default pool definition
Pool {
  Name = Default
  Pool Type = Backup
  Recycle = yes                       # Bacula can automatically recycle Volumes
  AutoPrune = yes                     # Prune expired volumes
  Volume Retention = 365 days         # one year
  Maximum Volume Bytes = 50G          # Limit Volume size to something reasonable
  Maximum Volumes = 100               # Limit number of Volumes in Pool
}
 
# File Pool definition
Pool {
  Name = File
  Pool Type = Backup
  Recycle = yes                       # Bacula can automatically recycle Volumes
  AutoPrune = yes                     # Prune expired volumes
  Volume Retention = 365 days         # one year
  Maximum Volume Bytes = 50G          # Limit Volume size to something reasonable
  Maximum Volumes = 100               # Limit number of Volumes in Pool
  Label Format = "Vol-"               # Auto label
}
 
 
# Scratch pool definition
Pool {
  Name = Scratch
  Pool Type = Backup
}
 
#
# Restricted console used by tray-monitor to get the status of the director
#
Console {
  Name = cahute-mon
  Password = "_0dScbTDQsRGHNNJ_I3AFyn-WiLIG37vc"
  CommandACL = status, .status
}

bacula-sd.conf

#
# Default Bacula Storage Daemon Configuration file
#
#  For Bacula release 9.0.6 (20 November 2017) -- ubuntu 18.04
#
# You may need to change the name of your tape drive
#   on the "Archive Device" directive in the Device
#   resource.  If you change the Name and/or the
#   "Media Type" in the Device resource, please ensure
#   that dird.conf has corresponding changes.
#
#
# Copyright (C) 2000-2017 Kern Sibbald
# License: BSD 2-Clause; see file LICENSE-FOSS
#
 
Storage {                             # definition of myself
  Name = cahute-sd
  SDPort = 9103                  # Director's port
  WorkingDirectory = "/var/lib/bacula"
  Pid Directory = "/run/bacula"
  Plugin Directory = "/usr/lib/bacula"
  Maximum Concurrent Jobs = 20
  SDAddress = 127.0.0.1
}
 
#
# List Directors who are permitted to contact Storage daemon
#
Director {
  Name = cahute-dir
  Password = "oWgUbJKr6EDurLmWJ1-h2Zx2kvLhaHMBP"
}
 
#
# Restricted Director, used by tray-monitor to get the
#   status of the storage daemon
#
Director {
  Name = cahute-mon
  Password = "i8PyJQ6MKMo686ZxIYf7tgwX9qYYcE_19"
  Monitor = yes
}
 
#
# Note, for a list of additional Device templates please
#  see the directory <bacula-source>/examples/devices
# Or follow the following link:
#  http://www.bacula.org/git/cgit.cgi/bacula/tree/bacula/examples/devices?h=Branch-7.4
#
 
#
# Devices supported by this Storage daemon
# To connect, the Director's bacula-dir.conf must have the
#  same Name and MediaType.
#
 
#
# Define a Virtual autochanger
#
Autochanger {
  Name = FileChgr1
  Device = FileChgr1-Dev1 #, FileChgr1-Dev2
  Changer Command = ""
  Changer Device = /dev/null
}
 
Device {
  Name = FileChgr1-Dev1
  Media Type = File1
  Archive Device = /media/sauvegarde/b_backup
  LabelMedia = yes;                   # lets Bacula label unlabeled media
  Random Access = Yes;
  AutomaticMount = yes;               # when device opened, read it
  RemovableMedia = no;
  AlwaysOpen = no;
  Maximum Concurrent Jobs = 5
}
 
#
# Send all messages to the Director,
# mount messages also are sent to the email address
#
Messages {
  Name = Standard
  director = cahute-dir = all
}

bacula-fd.conf

#
# Default  Bacula File Daemon Configuration file
#
#  For Bacula release 9.0.6 (20 November 2017) -- ubuntu 18.04
#
# There is not much to change here except perhaps the
# File daemon Name to
#
#
# Copyright (C) 2000-2015 Kern Sibbald
# License: BSD 2-Clause; see file LICENSE-FOSS
#
 
#
# List Directors who are permitted to contact this File daemon
#
Director {
  Name = cahute-dir
  Password = "yiqU4maMT7N0cqRr6k5ZZffEWHeFeJqHG"
}
 
#
# Restricted Director, used by tray-monitor to get the
#   status of the file daemon
#
Director {
  Name = cahute-mon
  Password = "PjCgI9tuT3BA-6d48xs_uSF4bfqDGnXHW"
  Monitor = yes
}
 
#
# "Global" File daemon configuration specifications
#
FileDaemon {                          # this is me
  Name = cahute-fd
  FDport = 9102                  # where we listen for the director
  WorkingDirectory = /var/lib/bacula
  Pid Directory = /run/bacula
  Maximum Concurrent Jobs = 20
  Plugin Directory = /usr/lib/bacula
  FDAddress = 127.0.0.1
}
 
# Send all messages except skipped files back to Director
Messages {
  Name = Standard
  director = cahute-dir = all, !skipped, !restored
}

This command is used to label physical volumes. The full form of this command is:

label storage=<storage-name> volume=<volume-name> slot=<slot>

If you leave out any part, you will be prompted for it. The media type is automatically taken from the Storage resource definition that you supply. Once the necessary information is obtained, the Console program contacts the specified Storage daemon and requests that the Volume be labeled. If the Volume labeling is successful, the Console program will create a Volume record in the appropriate Pool.

The Volume name is restricted to letters, numbers, and the special characters hyphen (-), underscore (_), colon (:), and period (.). All other characters including a space are invalid. This restriction is to ensure good readability of Volume names to reduce operator errors.

Please note, when labeling a blank tape, Bacula will get read I/O error when it attempts to ensure that the tape is not already labeled. If you wish to avoid getting these messages, please write an EOF mark on your tape before attempting to label it:

mt rewind
mt weof

The label command can fail for a number of reasons:

1. The Volume name you specify is already in the Volume database.
2. The Storage daemon has a tape or other Volume already mounted on the device, in which case you must unmount the device, insert a blank tape, then do the label command.
3. The Volume in the device is already a Bacula labeled Volume. (Bacula will never relabel a Bacula labeled Volume unless it is recycled and you use the relabel command).
4. There is no Volume in the drive.

There are two ways to relabel a volume that already has a Bacula label. The brute force method is to write an end of file mark on the tape using the system mt program, something like the following:

mt -f /dev/st0 rewind
mt -f /dev/st0 weof

For a disk volume, you would manually delete the Volume.

Then you use the label command to add a new label. However, this could leave traces of the old volume in the catalog.

The preferable method to relabel a Volume is to first purge the volume, either automatically, or explicitly with the purge command, then use the relabel command described below.

If your autochanger has barcode labels, you can label all the Volumes in your autochanger one after another by using the label barcodes command. For each tape in the changer containing a barcode, Bacula will mount the tape and then label it with the same name as the barcode. An appropriate Media record will also be created in the catalog. Any barcode that begins with the same characters as specified on the “CleaningPrefix=xxx” directive in the Director's Pool resource, will be treated as a cleaning tape, and will not be labeled. However, an entry for the cleaning tape will be created in the catalog. For example with:

        Pool {
          Name ...
          Cleaning Prefix = "CLN"
       }

Any slot containing a barcode of CLNxxxx will be treated as a cleaning tape and will not be mounted. Note, the full form of the command is:

label storage=xxx pool=yyy slots=1-5,10 barcodes