Nuage

Ceci est une ancienne révision du document !

1. Extract the firmware file you just downloaded. You should get 5 files:
   • AP (System &Recovery)
   • BL (Bootloader)
   • CP (Modem / Radio)
   • CSC_*** (Country / Region / Operator)
   • HOME_CSC_*** (Country / Region / Operator)
2. Add each file to it's respective field in Odin v3.13.3. Use CSC_*** if you want to do a clean flash or HOME_CSC_*** if you want to keep your apps and data.
3. Reboot your phone in Download / Odin mode (make sure your device is off) with the following button combo: POWER + VOLUME DOWN + BIXBY
   • Other options in case first option did not work or isn't possible.
   • Option 2 VOLUME DOWN + VOLUME UP than USB cable
   • Option 3 POWER + VOLUME DOWN + VOLUME UP
   • Option 4 POWER + VOLUME DOWN + HOME BUTTON
   • Option 5 (Note9) USB cable + VOLUME DOWN + BIXBY
4. Once in download mode, connect your phone to the PC, preferably using the original USB cable you got with your phone. Odin should detect your device and a BLUE box will show up with the COM port number. (Be sure, the SAMSUNG-drivers are installed on your PC!)
5. Do NOT tick any extra boxes. The only options to be ticked are F.Reset Time and Auto-Reboot.
6. Click the start button, wait for Odin to say 'PASS' in a GREEN box. Once the flash is complete, your phone will reboot, and you can disconnect your phone from the PC.